Discuss Tundish. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
V

vaughan

Just sat an exam at college, on unvented cylinders, one of the questions was, what type air gap is the Tundish? I answered type AUK1 but now not sure and cant find the answer in my work books, any one know?
 
Just found it in the Water Regulations guide I think its Air gap type AA. Unrestricted discharge.
 
Yes pretty sure it is. 1 question I know I have got wrong :(
If a customer reports cloudy water coming from the hot water outlets of a unvented cylinder type system what could the problem be?
 
Status
Not open for further replies.

Reply to Tundish. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
237
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
265
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my...
Replies
3
Views
585
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
288
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
348
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock