Search the forum,

Trouble connecting water inlet connection to plastic pipe

Post new thread

Discuss Trouble connecting water inlet connection to plastic pipe in the USA area at PlumbersForums.net

M

Mdali598

Messages
1
Hi,

I bought a new sink and it has a 1/2" water inlet pipe but d previous pipework for the kitchen sink is very weird and to be honest I'm not sure exactly what connection I need or what what item I need for to make this work.

please could you help me understand what fitting I would need as I want to connect to my old pipes securely and then use the inlet pipe to connect to my new sink.
 

Attachments

  • IMG_20210326_205438.jpg
    IMG_20210326_205438.jpg
    357.6 KB · Views: 17
  • IMG_20210326_205423.jpg
    IMG_20210326_205423.jpg
    112.4 KB · Views: 16
Hep2O Plastic Push-Fit Adapting Male Coupler 15mm x ½ - https://www.NoLinkingToThis/p/hep2o-plastic-push-fit-adapting-male-coupler-15mm-x/5970f x2

https://www.NoLinkingToThis/p/hep2o-smartsleeve-plastic-push-fit-pipe-inserts-15mm-10-pack/3158f
 

Reply to Trouble connecting water inlet connection to plastic pipe in the USA area at PlumbersForums.net

Similar plumbing topics

S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
64
Chuck
C
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
196
ShaunCorbs
ShaunCorbs
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
dreikher
dreikher
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
136
Lou
Lou
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
243
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools for Beginners
Tile News
Tiling Tools
TilersForums.co.uk | UK Tiling Forum - Est 2006
Tile Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock