Discuss Tool deals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

rocketmanbkk

Plumbers Arms member
Plumber
Messages
4,113
Friends

Anyone know of any sites with tool sales?

As you know mine got thieved so still replacing,

I've been looking but no luck with anything cheap thus far.

Cheers

Rct
 
Should be a few post crimbo deals surely... i' ll go check some of the usual suspects.
 
Should be a few post crimbo deals surely... i' ll go check some of the usual suspects.
 
have look at big red toolbox, prices are very keen, if they send the right item!!!!!!!!!
 
Status
Not open for further replies.

Reply to Tool deals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
153
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
310
PSxxxxxx
P
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
256
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
361
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the...
Replies
22
Views
658
Back
Top