Discuss Toilet Fill Valve in the USA area at PlumbersForums.net

Messages
4
Well this is a bit embarrassing, i am a plumber but took early retirement about 22 years back, things have moved on considerably since then. About three years back i fitted a comfort toilet in our cloakroom, a couple of years later the fill valve broke, well not exactly broke the washer failed, i couldn't get the right washer for it anywhere, life was much easier when i was still plumbing. Anyway i got a Fluidmaster fill valve from Screwfix, its worked fine but lately it randomly lets water into the cistern for maybe 3 to 4 seconds, maybe 2 to 3 times a day. Its got me beat, water level in cistern is fine,no leaks, and it doesn't appear to seep water into the pan.

Any Suggestions
 

Reply to Toilet Fill Valve in the USA area at PlumbersForums.net

Similar plumbing topics

Toilet continuously flushing/cistern filling. This happens regardless of what else is going on within the house (videos were taken before and...
Replies
3
Views
379
Suddenly my downstairs toilet stopped filling this week, I suspected a blockage in the filter or cistern itself, however after removal of...
Replies
12
Views
907
If a toilet has a flush valve with a 3/8s thread. Does this mean the hole on the cistern is smaller? I want to fit a 1/2 threaded one in it.
Replies
7
Views
604
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
491
    • Like
Had a issue with a Fluidmaster fill valve plastic 1/2" fitting. After being installed with a B&Q slimline toilet had to keep adjusting as when...
Replies
0
Views
631
Back
Top