Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss titan processor unit not talking to the control unit in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

D

Derrick Spavin

I have just replaced the Titan digital mixer processor unit which failed. like for like, but when i try to turn on the shower the control unit say connection error.
i have tryed turning the power off and on again hoping for a reset. nothing. it appears the processor will not pair with the control unit, although the instructions say it should auto pair.
Help please
Derrick
 

Reply to titan processor unit not talking to the control unit in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
216
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
262
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
156
Sonya K
S
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
216
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
138
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock