- Messages
- 34,363
- Solutions
- 2
Are they 3/4” they don’t look 1” but might be wrong as pics don’t look 100%
Discuss .... Tf1 brass valves .... in the Central Heating Forum area at PlumbersForums.net
The pipe end or threaded end? They come as 22mm and 28mm. This any good? https://fernox.com/wp-content/uploads/sites/3/2017/12/tf1_omega_filter_with_valves_v.004.pdf
2 1 in male iron to copper it is then lol seem to remember you can leave omega at an angle?
threaded end mate eg filterbody
Could you stick a valves omega body in there? Job done
Wouldn’t I now as only fit valveless type.
A lot better than the old ones then.I could but it would be horizontal due to the space
[automerge]1605730508[/automerge]
tbf the valves are ok touch wood haven’t leaked yet
Shouldn’t be a problem horizontally.I could but it would be horizontal due to the space
[automerge]1605730508[/automerge]
tbf the valves are ok touch wood haven’t leaked yet
Reply to .... Tf1 brass valves .... in the Central Heating Forum area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.