Search the forum,

Terminology for a mixer tap

Post new thread

Discuss Terminology for a mixer tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Rob Foster

Rob Foster

Esteemed
Messages
2,083
I want to buy a deck mixer for a bath installation with a shower attachment. Now the house has a worc combi so I was looking for an equimatic mixer as that’s what they used to be called years ago when I was on the tools. What do I look for please Rob Foster
 
Personally, I'd try to find an early Pegler bath shower mixer.
Why?
You'll know as soon as you pick it up! Real brass and will last literally a lifetime (especially coupled with our cartridges - sorry!) If a bit tatty, £50 gets em re-chromed and better than new. :p
 
YorkshireDave said:
Personally, I'd try to find an early Pegler bath shower mixer.
Why?
You'll know as soon as you pick it up! Real brass and will last literally a lifetime (especially coupled with our cartridges - sorry!) If a bit tatty, £50 gets em re-chromed and better than new. :p
Click to expand...
Had a set of Pegler quarter turn cartridges arrive today. Stripped the old ones out as they were both knack**ed. The cold one was faulty.:(
 
Thats made my day :D:D:D:D
Youd have paid 20 tops for ours ;) put another 20 in your pocket and given the custard 20. Legend status would have been free:cool::cool::cool:
 

Reply to Terminology for a mixer tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
177
Lou
Lou
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
224
ShaunCorbs
ShaunCorbs
L
Mains supply to mixer tap is pushing cold water to hot water pipe
I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is...
Replies
4
Views
617
LordWest
L
drippy
Trevi/Ideal Standard Bath & Shower Mixer A7000AA/A7100AA
Please help me obtain a copy of the user manual for this bath and shower mixer, pictured below. I am particularly concerned about how to re-regulate the bath filler so it fills the bath to the desired level. Many thanks!
Replies
2
Views
179
Ben-gee
B
A
How do I remove a rounded off screw from kitchen mixer tap?
I need to replace the washer of my kitchen mixer tap as it is leaking. I was able to remove the spout once by unscrewing the screw on the back of the tap. However now I can't remove it again as it seems I must have used the wrong screw head and have rounded off the head. Please see attached...
Replies
9
Views
423
Ben-gee
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electricians Talk
Tile Talk
UK Tiling Forum
Contractor Advice Forum
Tile Cutters
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock