Search the forum,

Discuss System boiler course in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Hobo128

Gas Engineer
Messages
302
Hi

I have not had much experience installing system boilers to vented and unvented systems as all my work is mainly combis and bathrooms, since starting up on my own every now and then I'll get a job that needs a system boiler set up to satisfy the needs of the property and family but I don't feel very confident installing one. I don't just want to be a combi monkey and want to get my head around these systems. Has anyone any course recommendations or any advise for me. Thanks a lot.
 
Status
Not open for further replies.

Reply to System boiler course in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
73
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
239
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock