Discuss Surface mount a shower mixer bar in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

tommy1712

Is there a bracket to surface mount the pipe work on a bar type shower mixer, I have only ever done these with the pipe work in the wall. I am supposed to be installing a pumped system tomorrow and the customer decided to get her own mixer. Just sent me a picture of it and dohhhh moment. Can't see how to work round this one lol
 
Screwfix sell chrome brackets that allow for installation of a mixer shower with exposed pipes.
 
Bristan Bar Valve Wall Mount 10 Fixing Kit Chrome-Plated | Spares and Parts | NoLinkingToThis

always best to fit pipework throught a timber battern to allow good fixings and make sure the tilers cuts holes just the right size.
 
Are when I quoted the job I said I'll supply everything but I got a excited text yesterday saying she had got the mixers.... Sends a pic...... Oh F!!k lol
 
Bristan Bar Valve Wall Mount 10 Fixing Kit Chrome-Plated | Spares and Parts | NoLinkingToThis

always best to fit pipework throught a timber battern to allow good fixings and make sure the tilers cuts holes just the right size.

i have fitted these before, not gunna work in this job the pumped supply pipes need to be mounted on the surface, I am unfortunately not refitting the room just replaceing the power showers with a pumped system
 
Most merchants will do a version of them. Ask for wall plate or back plate elbows for a bar shower.
Screwfix do them too if you are stuck
Mira Mira Bar Valve Elbow Kit Bar Valve Shower Elbow Kit Chrome | Spares and Parts | NoLinkingToThis
 
Status
Not open for further replies.

Reply to Surface mount a shower mixer bar in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

hi all i hope you are all well i'm planning to install my shower mixer on Saturday. today i was doing a dry fit and i wanted to show you some...
Replies
6
Views
564
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
288
S
Hi, hope all is well! I’ve fitted a compression cap on two of my shower mixer copper pipes (15mm). One of them has scratches and burring and is...
Replies
1
Views
419
I recently had a plumber come over to look at a badly leaking shower head. As best I can recall, he described the problem as a crack in the bridge...
Replies
2
Views
423
Hi everyone. I'm installing a walk in shower, opening into shower will be on right, mixer value on right, but shower head and drain on left. The...
Replies
9
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock