Search the forum,

Discuss Sorry its late, car show tomorrow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,642
Guys, apologies I mentioned this a while ago but forgot to remind you.

Cleavleys car show tomorrow just north of Blackpool .

If you like your cars theres hundreds there , its a great day out .

The weather at the moment looks ok ish so there will be a load of Cobras there.
 
Are you just going to look or will you be taking a car?
 
Are you just going to look or will you be taking a car?

Will be there all day Scott, as I say providing the weather is ok .
Some of the cobras have weather protection , mines non , in other words if it rains I am fect. Lol , where are you based pal
 
Down south
Post some pics if you take any :)

Yep will do , theres a great mix of cars , its a fair trail for us and having to drive into that Lancashire place is hard for us yorkies lol ... but its good for the town , it shuts for the whole day . We get there early and go straight to the Witherspoons for the breakfast , its the tradition lol
 
Status
Not open for further replies.

Reply to Sorry its late, car show tomorrow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
260
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
217
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
268
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
501
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock