- Messages
- 2,340
Instead of pushing the nut up against the tank and trying to seal around that I'm thinking you have to do the opposite...
As I suggested in my first reply pull and keep the nut away from the cylinder skin and pack the gap with whatever sealant, tape or epoxy you're going to try, I'd leave trying an epoxy till last as it'll be impossible to remove.
How big is the gap, the thickness of the perished rubber washer so 2-3 mm or so?
As I suggested in my first reply pull and keep the nut away from the cylinder skin and pack the gap with whatever sealant, tape or epoxy you're going to try, I'd leave trying an epoxy till last as it'll be impossible to remove.
How big is the gap, the thickness of the perished rubber washer so 2-3 mm or so?