Search the forum,

Discuss solar panels for flat roof in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

voivod

Plumbers Arms member
Plumber
Gas Engineer
Messages
354
Have to price a job for solar panels . Have fitted a few worcesters before.
What do you lot think of vokera or valliant panels as comparison for performance ? ease of fittng etc?
cheers
steve
 
Are you MCS certified for Solar Thermal?
 
I have a Viessmann flat panel on mine at home, weighs a chuffin ton.
 
Kingspan nice kit, expensive , try JouleUK we fit both
 
I have been very pleased with my Thermomax for over 26 years would advise evacuated tubes rather than flat panels, either way mount them as mine are on a stainless steel elevation frame.
Mount them very securely with regards to wind, think storms & gales.
PS Not that I have had any problems, I fixed them.
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to solar panels for flat roof in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
Replies
2
Views
153
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
227
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
220
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
211
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
139
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock