Discuss Slow tap flow after new tap valve in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
- Messages
- 34,366
- Solutions
- 2
I’m guessing you have a cylinder and a cold water tank
D
Deleted member 120897
Do you know how they isolated the water? My guess is a 1/4 turn valve under basin and it‘s not opened back up properly
- Messages
- 4
He turned the stop tap off for the whole House replaced the tap clvalve to stop leaking then back on its only that one tap, I'll check underneath just to make sure it almost sounds like air in system but I have no tank just a combi boiler
Reply to Slow tap flow after new tap valve in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Similar plumbing topics
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...