Search the forum,

Simon Johns at 3000 posts

Post new thread

Discuss Simon Johns at 3000 posts in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Simon F

Simon F

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,233
:drummer:...As well as just turning green well done for clearing 3000 posts...:drummer:
 
3000 Posts .... Sheeeeeeeeeeeeeeeeeesh I remember when you were but a mere centenarian :lol: :50::party::50:
 
Thanks very much guys

I'll try to keep my posts good and worthy of the trusted

:D
 
Nice work Simon 3000 posts all top drawer quality regards turnpin
icon7.png
 
Status
Not open for further replies.

Reply to Simon Johns at 3000 posts in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
250
Matt0029
M
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
194
mutley racers
M
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
194
Thomas J Marshall
T
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
225
cheddarman
C
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
115
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock