Discuss Setting the oil control valve on an Aga in the USA area at PlumbersForums.net

Reply to Setting the oil control valve on an Aga in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Vailant EcoTec Boiler with a Megaflo. These are controlled by a Honeywell controller. I have one 3 port diverter, where one of the...
Replies
5
Views
278
I have a home with an oil boiler in a garage turned into a flat, heating both flat and main house, running c plan with two pumps, two motorised...
Replies
0
Views
409
A
I have a oil fired Rayburn with a BM controller and flexitemp, installed for 10yrs +, which has developed a fault. It runs OK either high or low...
Replies
0
Views
905
Andrew N Yorkshire
A
Hi, I have an oil-fired Aga with a BM oil control valve and a Flexitemp thermostatic control (see the image in this thread for an example). When...
Replies
4
Views
8K
Andrew N Yorkshire
A
    • Like
Hi everyone, Just wanted to share my experience with "upgrading" an S plan setup to Opentherm and Vaillant Control Center (VR66). There are a few...
Replies
1
Views
1K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock