Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Selling analyser on ebay in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
Hey all. I have a 455 analyser which is 11yrs old. It is now £205 + vat a yr to get it calibrated. Now I heard of the kane trade up deal where you can get 20% off when you buy a new analyser. The thing is, kanes prices are 20% higher than all other places that sells them so ac5ually no deal at all. Has anyone managed to sell an analyser on ebay? Cheers
 
I think they all charge about the same tbh, I bought a spare 455 on fleabay for less than £100 but then you need add £300+ to get it up to scratch especially if it needs a new O2 sensor. As above, sounds like it's worth keeping the 455 rather than upgrading.

Try JMW ltd...

 
Last edited:
I think they all charge about the same tbh, I bought a spare 455 on fleabay for less than £100 but then you need add £300+ to get it up to scratch especially if it needs a new O2 sensor. As above, sounds like it's worth keeping the 455 rather than upgrading.

Try JMW ltd...

Thanks. Have emailed them for a price.
 
I think they all charge about the same tbh, I bought a spare 455 on fleabay for less than £100 but then you need add £300+ to get it up to scratch especially if it needs a new O2 sensor. As above, sounds like it's worth keeping the 455 rather than upgrading.

Try JMW ltd...

So this place was great. Cost £135 + vat for calibration. Compared to manufacturer £205+vat. So had 5his done and keeping analyser. Thanks all
 

Reply to Selling analyser on ebay in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi guys. I've been running an UFH installation/ repair business for 7 years now and one of my main frustrations is finding the parts for the UFH...
Replies
1
Views
213
Hi Folks, advice needed here... I am a 51 yr old leak detection engineer/plumber 2 years into self employment which i am loving. To get going I...
Replies
1
Views
409
Hello All, I am in the process of trying to open a new Plumbing Wholesalers in Wales / Western England. I have identified distributors and...
Replies
1
Views
384
Hi, Short version: I have about 4" of pipe sticking out of a concrete floor in a cupboard. It makes a 45-degree bend as it exists (bent, not with...
Replies
14
Views
1K
Hi all, So I did a job for a customer recently which involved swapping out an incredibly dangerous and poorly installed unvented hot water...
Replies
9
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock