Discuss seeking experienced advise on an intermittent fault on ideal logic combi? in the Gas Engineers Forum area at PlumbersForums.net

Before this thread continues, are you gas safe ?
Yes but not a great deal of experience with domestic boilers
[automerge]1574453569[/automerge]
Combi I take it, I have an ideal at home and had a strange issue.
I'll let u know what the issue was if you can answer the question above
Yes. Gas Safe.
Combi I take it, I have an ideal at home and had a strange issue.
I'll let u know what the issue was if you can answer the question above
Reg no. 133686 đź‘Ťđź‘Ť
 
Ok. Thanks for the replies. So no fault code, just ignition lock out. It can happen at any time of the day. Now that the colder weather is here my heating is back on. Any time CH is called for or manually switched on it fires up with no issues. When the heating is running and there is a HW demand there are also no issues. Could be coincidence but it has only ever failed to fire on HW only. I don't know at what stage the lock out occurs as when it's reset it runs with no issues so I've never actually been able to witness it.
if its gone to ignition lockout with no fault code how do you know its gone to ignition lockout, it will have a fault code you have to reset, could go further but wont at this moment. first question logic or logic plus, different displays. move to gas safe area then can advise more
 
Last edited:
Op send me your gas safe number in a pm and a pic of your gas safe card and I will sort the rest

Also in the mean time can you get your post count passed 10 please
 
if its gone to ignition lockout with no fault code how do you know its gone to ignition lockout, it will have a fault code you have to reset, could go further but wont at this moment. first question logic or logic plus, different displays. move to gas safe area then can advise more
It's a logic +. The display reads "ignition lockout check other gas appliances" no code.
 
Mines a c30 plus.
Kept having peculiar things happening to it.
It was under warranty only 2 years old.
I installed.
So I got ideal out turns out the thermisters where dropping in and out between swichnover.
To fast to notice had to be plugged in to show when it dropped out . It was that fast enough to confuse the boiler.
[automerge]1574504952[/automerge]
New thermisters been ok since
Might help
not to expensive to change either
[automerge]1574505112[/automerge]
Mine also played up when running the boys bath.
 

Reply to seeking experienced advise on an intermittent fault on ideal logic combi? in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

E
Have an Ideal Logic + 18 with intermittent fault. When on demand the display constantly changes from O to C but burner doesn’t start. Can fix by...
Replies
4
Views
738
Ideal logic heat 18. Uncoded intermittent fault near end of days use only. Burner reignites every 15 seconds on and off, but no fault code...
Replies
0
Views
707
Got up on Wednesday morning no hot water, (only cold water coming out of hot tap). Checked boiler, it had zero pressure and F1 fault showing. So I...
Replies
16
Views
1K
F
Hi, We have a new Ideal Logic Combi 30. A radiator today came off the wall and developed a leak. Plumber came and fixed (but didn't). At that...
Replies
6
Views
878
FrankMcg
F
Hi, As per the thread title, I have an Ideal Logic Combi 30 and I am having a problem with the pump, which keeps activating without any DHW/DCH...
Replies
2
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock