Search the forum,

screwfix Bosch GSB 18V-LI 18V 4Ah Li-Ion Cordless Combi Drill Coolpack Battery

Post new thread

Discuss screwfix Bosch GSB 18V-LI 18V 4Ah Li-Ion Cordless Combi Drill Coolpack Battery in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Super Mario

Super Mario

Gas Engineer
Messages
161
your thoughts on this bosch?

Bosch GSB 18V-LI 18V 4Ah Li-Ion Cordless Combi Drill Coolpack Battery | 18V Cordless Combi Drills | NoLinkingToThis
 
good drill, good battery. nice balance, powerful enough for medium duty jobs.
 
1 battery might be a pain but I really rate bosch professional power tools. I've never had any bother with them, whilst they may not be the best from a specification point of view they are reliable from my experience and do what they are supposed to. Shame they can't make their boilers as good.
 
Status
Not open for further replies.

Reply to screwfix Bosch GSB 18V-LI 18V 4Ah Li-Ion Cordless Combi Drill Coolpack Battery in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Dan
  • Sticky
Australia Morning Thread
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
74
Dan
Dan
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
196
SimonG
SimonG
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
240
Chuck
C
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
236
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock