Search the forum,

Riello oil pump question

Post new thread

Discuss Riello oil pump question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

apcdave

Messages
187
will a Riello mectron ( short stem and plate on top ) oil pump work satisfactorily on an RDB burner


many thanks


dave
 
Same sort of money, so I wouldn't bother trying to adapt one.
 
Status
Not open for further replies.

Reply to Riello oil pump question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
147
John.g
J
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
M
Mixer mixer shower, compatible with tanked supply
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
121
Last Plumber
Last Plumber
K
Running copper pipework above / across a Gas boiler?
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
Replies
1
Views
38
ShaunCorbs
ShaunCorbs
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Firefox
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Forum
Tile Advice
TilersForums.co.uk
DIY Advice
Electricians Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock