Discuss Replacing EPH t27 controls with Hive or similar in the Plumbing Jobs | The Job-board area at PlumbersForums.net

armyash

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,653
Hi i have a customer who has a 15i system boiler in the loft, there is a receiver up there also.

downstairs they have a an eph t27 progrmmer on the wall and a wireless stat. They want Hive or similar fitted that they can control from their phone, can anyone recommend what they would fit.

It looks like the t27 programmer would have to be replaced with the new receiver. Would it be a case of just removing the receiver/wiring they have in the loft?

Is there anything I need to look out for that might trip me up? Im not familiar with these Eph controls.

Thanks any advice/recommendations welcome.
 

Reply to Replacing EPH t27 controls with Hive or similar in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
327
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
321
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
464
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock