Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Replacement of obsolete controller in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

nellyboot

Hi,
im trying to find a replacement for a controller on an old(ish) combi boiler.
I've searched extensively and can't find anything which even claims to be a straight replacement.
Can anyone suggest a modern equivalent which would do the same job as the old one, please?
 

Attachments

  • IMG_0260.jpg
    IMG_0260.jpg
    33.3 KB · Views: 33
  • IMG_0261.jpg
    IMG_0261.jpg
    38.5 KB · Views: 33
get someone in to wire up an external progammer make that one obsolete
 
You may be right Shaun, I can't see.

If it is oil, get a heating engineer to wire an external one !
 
Status
Not open for further replies.

Reply to Replacement of obsolete controller in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
263
PSxxxxxx
P
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
275
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
201
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
244
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock