Search the forum,

Replacement for Armitage Shanks Tiffany 9776 cistern

Post new thread

Discuss Replacement for Armitage Shanks Tiffany 9776 cistern in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

S

ScotsLaddie

I have a cracked close coupled toilet cistern. It's an Armitage Shanks Tiffany 9776, which I believe has been discontinued. The water feed is on the bottom right hand side of the cistern. Would there be a cistern with which I could replace it?
 
Maybe the'll be a replacement cistern, of the right colour here,

nationwidediscontinuedbathrooms.co.uk

Armitage Shanks

Discontinued Armtage Shanks Parts, Montana, Tiffay, Astra, Coloured Bathrooms. Armitage Shanks Basins, Armtage Shanks Toilets, Armitage Shanks Toilet Seats
nationwidediscontinuedbathrooms.co.uk nationwidediscontinuedbathrooms.co.uk
 
snowhead said:
Maybe the'll be a replacement cistern, of the right colour here,

nationwidediscontinuedbathrooms.co.uk

Armitage Shanks

Discontinued Armtage Shanks Parts, Montana, Tiffay, Astra, Coloured Bathrooms. Armitage Shanks Basins, Armtage Shanks Toilets, Armitage Shanks Toilet Seats
nationwidediscontinuedbathrooms.co.uk nationwidediscontinuedbathrooms.co.uk
Click to expand...
Thanks Snowhead. I don't suppose you know if any Ideal Standard cistern would fit?
 

Reply to Replacement for Armitage Shanks Tiffany 9776 cistern in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
301
Bp89
B
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
512
Chuck
C
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
dreikher
dreikher
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
oz-plumber
O
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
336
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Forum for Electrical Advice
Electrical Blog
Electrical Advice | Electricians Blog
Tile Talk
Tiling Tools for Beginners
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock