Discuss Replaced shoer taps, lost a lot of pressure in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

D

Damien

Hey all.
Replaced the shower taps, and have lost a lot of pressure. Noticed the tap lengths are shorter than the other shower, wondering if i might have used basin taps.....would that have caused a big loss in pressure?
 
Do you have a cylinder and tanks in the loft ?
 

Reply to Replaced shoer taps, lost a lot of pressure in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

I’ve lost the pressure from the outside tap. It was working fine. I have checked the washer on the outside tap and the inside stop valve seen in...
Replies
6
Views
300
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
357
Hi, I was hoping to get some advice. I live in a three floor house with a gravity fed cold water system for all of the bathrooms. The tank is in...
Replies
3
Views
131
Hi All, I replaced my existing washbasin bowl set with new Shaw and Mason forward bowl set spindles and chrome handles. The water pressure has...
Replies
0
Views
343
Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
163
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock