Search the forum,

Renewable energy engineer student looking for work experience (plumbers mate)

Post new thread

Discuss Renewable energy engineer student looking for work experience (plumbers mate) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Dobbo

icon1.png
Renewable energy engineer student looking for work experience (plumbers mate)
I'm currently studying Domestic Renewable Energy Engineering with the training provider Train 4 Trade Skills. Im looking for full time or part time work experience within the london area. Throughout my course I will attain the following qualifications and carry the MCS Mark :

* C&G6189-11 Level 2 NVQ Diploma in Plumbing & Domestic Heating (Full Award)
* C&G2399-01 Level 2 Award in Environmental Technology Systems Awareness
* BPEC, Part P Defined Scope Electrical Qualification
* BPEC, Installation,service & maintenance of domestic unvented hot water systems
* BPEC, Solar Thermal Hot Water Systems
* BPEC, Certificate in the installation & maintenance of Heat Pump systems (Non Refrigerant systems)
* BPEC, Certificate in the installation & maintenance of Water Harvesting & Re-use systems
* BPEC, Certificate in Warm Water Underfloor Heating

I enjoy to work in a demanding environment where I get an opportunity to excel my skills. I'm a quick learner, very hard worker,I'm reliable to work enthusiastically and well under preasure. I'm looking for the chance to prove myself and to gain the experience not just to help me with my studys but to become one of the best in my field.


Many Thanks

Ben Dobbins

Mobile 07825300661​
 
Status
Not open for further replies.

Reply to Renewable energy engineer student looking for work experience (plumbers mate) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Lou
  • Article
Plumber Who Worked Illegally Gets Suspended Sentence
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
106
Lou
Lou
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Timmy D
T
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
121
Lou
Lou
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
38
Chuck
C
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
440
FozzieBear
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock