Search the forum,

Discuss range master toledo 90 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

CXR100

Plumbers Arms member
Plumber
Gas Engineer
Messages
889
got a job to look at above dual fuel cooker, there are some issues with the hob, 1 not igniting, and one only sometimes, one is sooting up badly and has a yellow flame, cleaned it out injector looks ok . cant take top off to inspect further because the tenant has tiled down to it!!!!! so he has to remove tiles now so I can get cooker out ect, phoned rangemaster, they didn't have a clue on part numbers so I could ordered them , can anyone point me in the right direction , im thinking some air port or something has bloked to the hob ring, any ideas? and want to order 2 new igniters . any help would be great. thanks
 
get online to google specialist cooker parts suppliers, just need a model number to get the parts you want.
 
Status
Not open for further replies.

Reply to range master toledo 90 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
161
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
168
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
500
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
214
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
268
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock