Discuss Question regarding wall thermostat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

bayliner

Hi Guys

Another question regarding my central heating. All my rads have the same valves, just basic white ones that can be turned. They don't have a white capped one so unsure which is the lock shield one, but have read how to work this out so hopefully I should be able to balance out the radiators.

My my question is that I have a thermostat on the wall in the lounge, should the radiators be fully opened and I just control the heat from the wall or can I still control the heat from each radiator.

thanks in advance

paolo
 
Status
Not open for further replies.

Reply to Question regarding wall thermostat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
147
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
285
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath...
Replies
2
Views
233
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
308
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
264
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock