Search the forum,

Pushfit manufacturer identification

Post new thread

Discuss Pushfit manufacturer identification in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

M

Mark 123499

Can anyone help identify the brand of this fitting? I’m trying to identify what inserts I’ll need to connect in to existing pipe.

https://community.NoLinkingToThis/attachments/124e6307-a2de-4f33-9c5e-973331467876-jpeg.78235/
 
The fittings don't matter what you need to identify is make of pipe and use correct inserts for that.
Make written on pipe.
Tube and fittings are often 'mixed & matched ' no guarantee there both the same.
 

Reply to Pushfit manufacturer identification in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

D
Pop quiz, does anyone recognise this radiator valve?
Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
2
Views
87
dimuc
D
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
Stigster
Stigster
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
242
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
197
SimonG
SimonG
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
263
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock