Search the forum,

Pressure gauge for 22mm pipe

Post new thread

Discuss Pressure gauge for 22mm pipe in the USA area at PlumbersForums.net

I

iconboy2021

Messages
30
Hello,

Can someone be kind to tell me what parts do I require (and where from) if I want to fit a pressure gauge on a 22mm feed, I guess I would need a tee to house the gauge, cant seem to find anything online.

Many thanks
 

Attachments

  • pressure-gauge.png
    pressure-gauge.png
    55.8 KB · Views: 5
22-1/2 tee
1/2 - either 1/4 or 1/8 depending on the guage fitting
 

Reply to Pressure gauge for 22mm pipe in the USA area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
137
Lou
Lou
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
ShaunCorbs
ShaunCorbs
D
Covering shallow sewer pipe under concrete Patio
Hello all, Iā€™m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. Iā€™m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
243
DIwhYdidIstartThis
D
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
65
Chuck
C
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
212
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Forum
Tiling Forum UK
Tiling Tools
UK Tiling Forum
UK Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock