Just thought I would update from previous post if anyone interested, above boiler had ignition fault, though I got up early and watch boiler until fault occurred right after some gurgling sounds so basically ran HW and CH for a couple of hours, never heard anymore noises and has had no faults since so I'm guessing air has managed to escape via vent . Happy days.
- Thread starter jrmroxx
- Start date
- Replies 1
- Views 1K
- potterton potterton suprima suprima update
Discuss Potterton Suprima 50L update in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Potterton Suprima 50L update in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The...
Hi,
As per the thread title, I have an Ideal Logic Combi 30 and I am having a problem with the pump, which keeps activating without any DHW/DCH...
Hi. I have an issue with my Ideal Logic+ System S24 boiler which I hope someone can help with. Below is as much detail as I can think of.
The...
Hi all,
Got a nightmare situation with a central heating system I recently adopted. It's an open vent system with a combined F&E pipe, with a...
I have a Potterton FF60 model boiler which has just decided it doesn't want to ignite anymore. There is not 'click' 'click' 'click' sound that you...