Search the forum,

Discuss potterton promax 33 he issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

plumbbobshan

Gas Engineer
Messages
79
Afternoon lads and lasses , having some issues with this boiler . Heating working fine. Hot water keeps dropping in and out !!!
Recently had new diverter cartridge and motorised head as the hot water was going into the heating and hot water sensor (green wires) and its reaching 90 and then turning off ?
Could the plate heat exchanger need a de coke or is it something else ?
Thanks in Anticipation
 
Sounds like aslong as the diverter is working properly plate
 

Reply to potterton promax 33 he issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
361
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
190
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
279
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
258
PSxxxxxx
P
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
417
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock