H
hus882
All,
I was hoping you could help me, we are trying to replace a cabled Stat with a wireless CMT927 and we are having difficulties! I was wondering if anyone could give me some advice as to how to cable up the two units, we have taken power from the EP2000 down to the RF receiver, originally the cables from the stat were going into:
Blue - 4
Yellow - C
Red - 2
The cabling appears to be quite a mess, to my understanding (apologies its quite limited) the its pumped heating system with gravity hot water, currently its working along side a netaheat boiler. I will add a pic later, what i need to understand is how many cables are required from the CMT927 and where they need to go?
Your help is much appreciated - I will be online later to add some additional information and pictures.
Thanks,
Hus
I was hoping you could help me, we are trying to replace a cabled Stat with a wireless CMT927 and we are having difficulties! I was wondering if anyone could give me some advice as to how to cable up the two units, we have taken power from the EP2000 down to the RF receiver, originally the cables from the stat were going into:
Blue - 4
Yellow - C
Red - 2
The cabling appears to be quite a mess, to my understanding (apologies its quite limited) the its pumped heating system with gravity hot water, currently its working along side a netaheat boiler. I will add a pic later, what i need to understand is how many cables are required from the CMT927 and where they need to go?
Your help is much appreciated - I will be online later to add some additional information and pictures.
Thanks,
Hus
Last edited by a moderator: