Search the forum,

Polypipe thermostat problems

Post new thread

Discuss Polypipe thermostat problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

Ledevane

Hi, I've got a polypipe thermostat which controls my underfloor heating. The batteries recently went flat on the thermostat and the heating seemed to default to 'on' - the room temperature got to 25 degrees. I replaced the batteries and reset the date time etc but the heating is still on. I've tried turning the thermostat off completely and the heating keeps running. Ive also tried putting it on a timer programme set to 5degrees but the heating is still on. I really just want to turn the heating off completely but any ideas of how to solve this would be great. Thanks
 
Status
Not open for further replies.

Reply to Polypipe thermostat problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
130
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools
Electrician Talk Forum
Tile Cutters
UK Tiling Forum
Tiling Standards BS5389
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock