- Messages
- 3
Can anybody identify the make of this divertor valve. Actuator is missing!!
Cheers.
Cheers.
- Thread starter MuckSpreader
- Start date
- Replies 4
- Views 646
- divertor identify please valve
Discuss Please identify divertor valve in the Water Underfloor Heating Advice area at PlumbersForums.net
- Messages
- 3,900
As above or V6 if it's 1"
Wait till you see the price of the TA actuators.
www.heatingcontrolsonline.co.uk
Wait till you see the price of the TA actuators.
Drayton (ACL) TAV4 Valve Body
www.heatingcontrolsonline.co.uk
- Messages
- 3
Thanks. I thought it might be a Drayton as there is a Drayton RB1 relay unit nearby.
I'll make some inquiries along the TA M4 route.
Apparently, the original failed, was replaced, and that failed?? The replacement was sent back to wherever, and didn't turn up. Neither did the original plumber...
Valve does do a 360 without restriction, so no jamming there.
Cheers.
- Messages
- 3
Oh yes, seen the prices when doing some searching before I posted for identification.
Reply to Please identify divertor valve in the Water Underfloor Heating Advice area at PlumbersForums.net
Similar plumbing topics
Hi Everyone,
Can anyone help me identify this type of valve please. Thanks
Hi
I have a kitchen mixer tap which allows the top part to pull out as a hose (like american sinks).
It has frayed and I need t replace it, can...
My first thought when I heard this fault a combi boiler with hot water but no heating. Was a problem with the stat, controls not making the call...
Hi all, can anyone identify this flush valve, there are no manufacturers marks on it, the seal needs replacing, thanks.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...