Discuss PCB Fuses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

village idiot

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,126
Can anyone please kindly advice me where I can obtain PCB Fuses (2amp) from?
My local Plumbase dont seem to stock them?
thanks
 
Thanks a lot for the prompt reply bod.

eehhemmm, nice avater there, I must admit, cough:teeth_smile:
Thanks again
 
Euro boiler parts, you can buy a whole box with different sizes ( can not be got short then )
 
Thanks buddy!
I must admit I have never heard or bought from Euro Boiler Parts.
I get most of my parts from MDS in Sydenham, Catford.
Will research their location on the net.
Thanks
 
Status
Not open for further replies.

Reply to PCB Fuses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, I'm hoping to get some advice on an issue I'm having with my Vaillant Ecotec Pro 24 boiler (R1 PCB). It was installed in 2013 and has...
Replies
1
Views
213
  • Locked
Hi all We have a Vaillant turbomax plus 828e combi which we found powered off a few days ago. Turns out the 2a glass fuse on the PCB had gone...
Replies
1
Views
388
Morning All, hoping you can help me out with some advice. I have a triton AS2000x manual power shower, we had a power cut last night after the...
Replies
2
Views
491
    • Funny
    • Optimistic
Hi, I've got a ferroli 901 boiler, I initially thought the pcb was at fault so bought a new one and I'm having the same problem ( has been...
Replies
2
Views
625
A
Hi guys I finished my gas course in September can anyone help me i need to do 2 install and services. Am living i ln leeds west yorkshire I do...
Replies
0
Views
347
Ahmad marian
A
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock