Shaun, in an effort to simplify, why can't I use the existing setup to "blow out" the OK line using compressed air into the valve's small bleeder hole (red handle)... with the valve closed the air should clear the down line system, right ?
The red handle valve is a stop waster valve, I also have a ball valve with a bleeder I can use, which might be a better choice.
I am attaching an un-cropped pic for more detail... there are two pvc pipes over lapping in the pic (lower) goes directly to the OK supply.
The red handle valve is a stop waster valve, I also have a ball valve with a bleeder I can use, which might be a better choice.
I am attaching an un-cropped pic for more detail... there are two pvc pipes over lapping in the pic (lower) goes directly to the OK supply.
