Search the forum,

Older Type 15mm Push-Fit Connection

Post new thread

Discuss Older Type 15mm Push-Fit Connection in the USA area at PlumbersForums.net

I

Ian_Kellaway

Messages
1
Hi, Would anyone please be able to identify this older type of push-fit connector? The pipe is 15mm PX and I intend to carry out some modifications and replace with new 15mm JG Speedfit fittings. Are the older type fittings easily demountable?
Thanks in advance.
 

Attachments

  • IMG_3915.jpg
    IMG_3915.jpg
    320.5 KB · Views: 29

Reply to Older Type 15mm Push-Fit Connection in the USA area at PlumbersForums.net

Similar plumbing topics

T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
265
ShaunCorbs
ShaunCorbs
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
184
ShaunCorbs
ShaunCorbs
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
54
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
245
exedon2
exedon2
D
Pop quiz, does anyone recognise this radiator valve?
Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
3
Views
113
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

BS 5389 Tiling Standards
Tilers Forum
Tiling Forums UK
Tilers Forums UK
UK Tiling News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock