Search the forum,

Discuss noise levels / vokera vision 30c in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
10
hi

looking for a quiet compact combi with a good warranty....

could anyone advise how loud the vision 30c is in operation?

thanks :)
 
one of quietest boilers are vaillants think they have won awards for it, also if registered through vaillant then you get 7 years free warranty or pay extra for 10 years but the caveat is you need to have it serviced every year to keep th ewarranty in place
 
thanks i looked at these and while good quality they seem expensive for install and purchase - as i understand to get more than 2 yrs warranty they need to be installed by a vaillant "advance installer"(?)
 
Worcester Bosch Greenstar by Accredited installer, with primary filter and controller, 10 year warranty, 0% finance for 12 months, but same with warranty tied to servicing, but worcester aftersales service is top notch
 
INTERGAS if you want a quiet operation boiler they do compact versions , I cant help with vokera as I don't fit them regards kop
 
i will say this with boilers you tend to get what you pay for, vaillants, and viessmann are what i like to fit
 
I would have thought cheap = noisy and expensive = quieter. Bit like dishwashers etc.

Can't beat a 30 year old oil boiler, you can hear it running two streets away
 
Status
Not open for further replies.

Reply to noise levels / vokera vision 30c in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
226
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
279
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
315
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
227
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
339
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock