Posting a message to the forum will remove the above advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Checkout our Plumbers Insurance area - heavily discounted Public Liability Insurance and Van Insurance specifically designed for plumbers.

Discuss NO I AM NOT AN UNDERFLOOR HEATING EXPERT! in the Underfloor Heating Forum area at UKPlumbersForums.co.uk.

Thread Status:
Not open for further replies.
  1. GH77

    GH77 GSR Top Contributor!!

    Flir One for ios, i've hire £4000 worth of Thermal imaging in the past and while the Flir is not at that level of imaging it's amazing value for money and definitely up to the job.. i had a job recently in a school that had 7 manifolds supplying 30 zones all with rf stats, the loops hadn't been laid to the drawings, but the stats had been associated to the drawing resulting in stats calling zones they weren't in .. I worked through the building one loop at a time tracing it's route with the Flir and marking up the manifolds, i then cleared the channels on the controllers and repaired all the stats correctly, was a long process and took 2 days, but couldn't have done it without thermal imaging and drastically cheaper than buying/ hiring a £4k camera :)
     
    • Like Like x 1
  2. Matchless.plumb

    Matchless.plumb Trusted Plumber GSR

    Thanks a lot for your reply is much appreciated. Do you remember what model it was ? Must have been a massive help and a relief for you
     
  3. Harvest Fields

    Harvest Fields Trusted Plumber GSR Top Contributor!!

    The model is a Flir one for iOS. Type it into google mate. It will come up. I have just done the same. Just over £200.00
     
    • Like Like x 1
  4. Matchless.plumb

    Matchless.plumb Trusted Plumber GSR

    Thanks harvest!!!
     
  5. Matchless.plumb

    Matchless.plumb Trusted Plumber GSR

    Is not a bad price if you need to use a flir camera. Does this model do the job if so that's not bad, I guess quite a good investment
     
  6. Harvest Fields

    Harvest Fields Trusted Plumber GSR Top Contributor!!

    Never used one mate
     
  7. GH77

    GH77 GSR Top Contributor!!

    Like Harvest said around £200 on Amazon . I wouldn't be without mine now, i've now had 3 commercial UFH jobs sorting out systems that others have "commissioned " had one where there was a 240v actuator on a 24v system, the commissioning certificate had a flow Rate written on it! .. i'd like to know where they got that reading from . i use mine to show the customer when I'm commissioning, they like seeing the loops heating up in the floor
     
    • Like Like x 1
  8. Dilalio

    Dilalio Member

    It's not heating season, so the only demand on the primaries at this time of year, in your average household (correct me if this is not the case and the users are foreign) should be for hot water and reverse circulation would occur if the cylinder is not the last T on the boiler return, thus allowing hot primary return from the cylinder to find its way into the heating circuits.
     
  9. Harvest Fields

    Harvest Fields Trusted Plumber GSR Top Contributor!!

    All of the returns now have non returns on them.
     
  10. Dilalio

    Dilalio Member

    Ok. Then it has to be a wiring issue and primary HW flow is getting to heating circuits via a mzv that is open when it shouldn't be... have you checked for this? Can you confirm that the problem occurs when there is a demand for HW only?
     
  11. Harvest Fields

    Harvest Fields Trusted Plumber GSR Top Contributor!!

    I do like your thinking. But It does not happen when the hot water is on. Only when the UFH is switched on?
     
  12. Dilalio

    Dilalio Member

    Ok. Now getting more of the story which is probably in the previous posts but that's easy to miss until one joins the party;)
    If this only happens on demand for UFH then what is the mzv for the rad curcuit doing at that call? Does it open up? Check wiring to it from stat(s) is there a backfeed that is energising it?
    Maybe it's faulty and staying open. I'd isolate it electrically from the circuit and then fault find on it if the problem goes away during isolation.
     
  13. Harvest Fields

    Harvest Fields Trusted Plumber GSR Top Contributor!!

    The heating circuit MZV is brand new. I fitted a new one from the suppliers incase the old one was temperamental and no power to the valve when UFH is on at all not even the 50/75volts you sometimes get when they are back feeding.
     
  14. GH77

    GH77 GSR Top Contributor!!

    Thermal image it ;)
     
  15. Harvest Fields

    Harvest Fields Trusted Plumber GSR Top Contributor!!

    Think I will
     
    • Like Like x 1
Loading...
Similar Threads - UNDERFLOOR HEATING EXPERT Forum Date
Rehau underfloor heating: help? Plumbing Forum Saturday at 7:37 PM
Propix Underfloor Heating. Insulation underneath? Plumbing Forum Sep 5, 2018
Thread Status:
Not open for further replies.