Search the forum,

New McAlpine flexible WC connectors...

Post new thread

Discuss New McAlpine flexible WC connectors... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
AlexGas

AlexGas

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,849
Couldn’t find the PDF on the net. It came out April this year. Here it is:

mca1.jpg
mca2.jpg
mca3.jpg
 
See they could solve a few problem's.....especially on some of the imported pan's...regards Turnpin:8:
 
If the spigot is tapered the jubilee clip pushes the PC off, only way I've found to do this is to use ridgidn4" fittings and pipe.
 
Status
Not open for further replies.

Reply to New McAlpine flexible WC connectors... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
263
ShaunCorbs
ShaunCorbs
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
193
Thomas J Marshall
T
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
dreikher
dreikher
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
114
Lou
Lou
Lou
  • Article
Plumber Who Worked Illegally Gets Suspended Sentence
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
112
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock