Search the forum,

Neostrahl tap leaking

Post new thread

Discuss Neostrahl tap leaking in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

as1981

All,

I have one of the taps shown in the attachment. I can't find any way of opening it to repair the leak. Could anyone advise?

Thank

Andrew
 

Attachments

  • 20170203_084504[1].jpg
    20170203_084504[1].jpg
    98.5 KB · Views: 19
Can't help with that, sorry.

But I can tell you, that I had a problem tap and the only name visible was Neostrahl on the nozzle.
They come out, and on my tap the name only applied to the nozzle, not the tap.

There might be a very small grub screw at the back.
 
Status
Not open for further replies.

Reply to Neostrahl tap leaking in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
297
Bp89
B
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
194
Thomas J Marshall
T
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
132
fowlerboi
F
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
232
Firefox
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
117
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock