My first cylinder install with boiler

[ShaunCorbs]

It can be piped into the control block / manifold but it needs to be in the right port eg the expansion one and not the balanced cold

 

[jaydebruyne]

Spot on jay

Think you've cursed me

Since yesterday I've had two unvented cylinder jobs come out

View attachment 32998

View attachment 32999

Lol glad it’s not just me then

 

[Harvest Fields]

It can be piped into the control block / manifold but it needs to be in the right port eg the expansion one and not the balanced cold

Glad I have asked for the instructions now.

 

[ShaunCorbs]

Glad I have asked for the instructions now.

Do you want them now ?

 

[Harvest Fields]

Do you want them now ?

Can you put a link on? They are not on the Vaillant app.

 

[ShaunCorbs]

Can you put a link on? They are not on the Vaillant app.

Depends

 

[ShaunCorbs]

https://www.vaillant.co.uk/downloads/unistor-installation-service-manual-261492.pdf

Pg9

 

[ShaunCorbs]

Just incase here's there solar one as well

https://www.vaillant.co.uk/downloads/aurostor-commissioning-maintenance-troubleshooting-261490.pdf

 

[Harvest Fields]

https://www.vaillant.co.uk/downloads/unistor-installation-service-manual-261492.pdf

Pg9

Cheers mate

 

[rpm]

Remember when Jay used to sweat about simple things. My my look at him now!
The world is your oyster m8.

 

[jaydebruyne]

Remember when Jay used to sweat about simple things. My my look at him now!
The world is your oyster m8.

Haha I know mate.. how funny!! Who’d have thought the guy who’d pooh his pants over nothing is now doing stuff like this! I wouldn’t be here without you guys, you’re my lifeline!!!!

 

[townfanjon]

Ex vessels were always piped out of the inlet control set , but as the years have gone by , tee-ing into cold feed is the done thing

 

[king of pipes]

Not bad for your first one bud few errors but overall a tidy job your gonna struggle lagging your pipework ,next time space your pipes off the wall a bit and a little further apart . cheers kop

 

[jaydebruyne]

Not bad for your first one bud few errors but overall a tidy job your gonna struggle lagging your pipework ,next time space your pipes off the wall a bit and a little further apart . cheers kop

What errors can you see kop? Other than the discharge which I sorted today.

 

[jaydebruyne]

Out of curiosity, roughly what would you guys charge (labour only) to fit a system like this.. all new heating and cold/hot water pipework throughout, 10 rads, boiler/cylinder and all controls and new gas run, about 16 meters.