Seen loads , on one thermal store I work on , the Imm heater blows and the git opens up and is a bloody nightmare to get out, end up with coat hangers and allsorts to wrestle it out lol
I see them like that very often. I also don't understand why the trips don't go off.
Another similar thing is the elements in electric showers go the same way and I saw one still worked on lower power output with one element gone.
Here is photo of Mira Advance elements so similar and wouldn't put trip off.
Last edited:
Status
Not open for further replies.
Reply to My electrics are tripping in the Plumbing Jobs | The Job-board area at PlumbersForums.net