Search the forum,

Motors tv gone??

Post new thread

Discuss Motors tv gone?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Chalked

Chalked

Esteemed
Plumber
Gas Engineer
Messages
5,023
Has motors tv dissapeared again?

chanel 447 saying not available! :wheelchair:
 
again..
there is a way to manually tune it and thats what I dont last time, if i find it ill post
 
oh i hope not love aussie v8's.
didnt they have a dispute a while with sky when they went off air for a while.
 
Status
Not open for further replies.

Reply to Motors tv gone?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
Trianco Eurostar 50 - 60 (S) oil burner riello motor problem
I'm looking for some advice on a frustrating problem I'm having with my old Eurostar 50-60s oil boiler please? Although it's old, most parts needed to operate it are now new. The symptoms indicated a broken/seized burner motor or oil pump. I wrongly assumed the motor so I ordered a new one only...
Replies
3
Views
714
Jacey96
J
B
Worcester Motor running constantly but
Worcester Boiler. Really annoying. All works as it should fine in normal use. However have to go away for a couple of weeks at a time. I put the boiler in holiday mode 5 degrees it's very unlikely it's needed to kick in. When I come back the boiler pump motor is often running even though it was...
Replies
2
Views
765
Bosch Sauce
B
D
Grant Spira Wood Pellet Boiler
The boiler has a servo motor on the brazier. Does this mean that the brazier opens to drop ash into the ash can? The boiler doesn’t perform the cleaning sequence. I think the program has been corrupted. What is the password to get into the program to check or reprogram?
Replies
0
Views
366
DennyB
D
S
Changing Danfoss HPA2 for Honeywell
I have a Danfoss 2-port valve model HPA2 (which has suspect motor issue) I can get Honeywell 2-port valves & motors much cheaper & easier as local Trade place stocks Honeywell. Is there a direct equivalent Honeywell motor activator? ....... so I could just swap the synchronous motor over ? or...
Replies
0
Views
630
sargan
S
B
Saniflo SoloLift2 : Impeller keeps getting stuck
Hello everyone, I have a Grundfos SoloLift2 WC1 on a toilet and since a few months the impeller keeps getting stuck. I was quite happy to unblock it myself using the service shaft above the motor and a long screwdriver, but it keeps happening roughly once every month. When stuck, it makes a...
Replies
4
Views
161
bibial
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock