Search the forum,

Mixer tap end cap release

Post new thread

Discuss Mixer tap end cap release in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

J

Jeff Scott

I have what I think is an older style Mondella/Watermark mixer tap that needs the cartridge changed. I have done this many times on my taps before, but on this unit, I can't find the screw that releases the end cap. Any advice - other than replacing the unit - would be appreciated. I would attach pictures, but I can't see any way to do that here.
 
You attach files using the button on the below left of text box, I’ve attached a screenshot
 

Attachments

  • 83FD8DFA-B255-4AF0-BD8B-01DE9712EF85.jpeg
    83FD8DFA-B255-4AF0-BD8B-01DE9712EF85.jpeg
    466.7 KB · Views: 3

Reply to Mixer tap end cap release in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
113
Lou
Lou
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
236
Chuck
C
B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
296
Bp89
B
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
196
SimonG
SimonG
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
129
fowlerboi
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock