mapress

[ShaunCorbs]

anyone know if the Adaptor union with male thread

would be suitable for ng/lpg but remove the black seal and replace it with a HNBR (Gas)


many thanks
shaun

ps emailed geberit already just wanted to know if any of you guys have done it?

 

[Chalked]

Thought they did one specifically for gas?

 

[ShaunCorbs]

Thought they did one specifically for gas?

they do but not with a union on the end

 

[PriestyUK]

Can you not use a black or galv one and put mapress male irons in it if they do not manufacture one?

 

[ShaunCorbs]

Can you not use a black or galv one and put mapress male irons in it if they do not manufacture one?

tbh it doesnt warrant it, its only on a bloody reg (3/4) on a dual bottle set up (lpg) but thinking ahead when it needs to be changed and its not the easiest thing to get to as normal in the corner

 

[ShaunCorbs]

Can you not use a black or galv one and put mapress male irons in it if they do not manufacture one?

thnx for making me look found something that will do

3/4" 1/2" MALE x FAMALE REDUCTION NIPPLE FOR WATER UNION FITTINGS BRASS | eBay

and just use a 1/2 male to 22mm mapress

 

[PriestyUK]

Nice one will look the job as well being brass, wished I'd thought of that