Search the forum,

Discuss Many thanks to SIMON !! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

P J F PLUMBING

A big thanks to simon you a great help today fingers crossed for wednesday many thanks mate
 
i have a right warm feeling inside when we help each other out last year stan came up from london to help me , tomorrow im over the darkside of the pennines to help kay-jay out

we need a motto like bts "its good to talk" lol
 
i have a right warm feeling inside when we help each other out last year stan came up from london to help me , tomorrow im over the darkside of the pennines to help kay-jay out

we need a motto like bts "its good to talk" lol
ya big softie :)
 
going to be a good week , helping a fellow tradesmen out , taking ÂŁ20 off villa tom , diary is chocky full booked out
 
Status
Not open for further replies.

Reply to Many thanks to SIMON !! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
119
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
504
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
245
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
223
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock