Search the forum,

Discuss Malteser and tape measure game in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Phil

Plumbers Arms member
Plumber
Messages
4,240
Has anyone played this game? Put the end of a tape measure in someone's mouth and see if you can roll a Malteser down it.
Don't use the one in the tool box god knows what manky ness is on there.
 
I can't help but feel this is leading to something really dodgy.
 
Has anyone played this game? Put the end of a tape measure in someone's mouth and see if you can roll a Malteser down it.
Don't use the one in the tool box god knows what manky ness is on there.

Ummm no...

<carefully backs away from the strange man....>

:D
 
I've never played it but it's a popular Christmas party game.
 
Play it with someone you're not fussed on with a new 8m Stanley
Let it retract and pull their teeth out :38:
 
Status
Not open for further replies.

Reply to Malteser and tape measure game in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
524
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
255
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
302
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
189
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
340
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock