Search the forum,

Discuss Looking for a plumbing apprenticeship around Norfolk area Kings Lynn +20/30 miles... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Re: Looking for a plumbing apprenticeship around Norfolk area Kings Lynn +20/30 miles

Still looking guys :\
 
:) still trying to find somewhere

Sent from my GT-I9000 using Tapatalk
 
Re: Looking for a plumbing apprenticeship around Norfolk area Kings Lynn +20/30 miles

:willy_nilly:

going crazy trying too find somewhere...
 
Re: Looking for a plumbing apprenticeship around Norfolk area Kings Lynn +20/30 miles

:6:still in need of one
 
Re: Looking for a plumbing apprenticeship around Norfolk area Kings Lynn +20/30 miles

So I thought I'd give tiling a go :)

IMG_20120407_163442.jpg


IMG_20120407_163521.jpg


IMG_20120407_163512.jpg


Grouted:

IMG_20120409_162519.jpg


IMG_20120409_162502.jpg


Tiles/mosaics that aren't in, isn't an accident its because there's screws underneath them so they shall be removable to then un-screw the wooden box to get to an ISO Valve :)

Window sill:

IMG_20120409_162442.jpg
 
Re: Looking for a plumbing apprenticeship around Norfolk area Kings Lynn +20/30 miles

i see you've picked up another skill. looking good mate
 
Thanks, just need a coat of paint on the walls and a few little finishing touches then it will be complete :)

Sent from my GT-I9000 using Tapatalk 2
 
Still looking, applied for 2 apprenticeships in my area, 1 has already said no due to my age even after offering to pay for the tuition :(

Sent from my GT-I9300
 
Status
Not open for further replies.

Reply to Looking for a plumbing apprenticeship around Norfolk area Kings Lynn +20/30 miles... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
311
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
150
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
158
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
222
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
416
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock