Search the forum,

Liability insurance - recommendations please

Post new thread

Discuss Liability insurance - recommendations please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Depends what you do?

We use QBE but that's mainly because we work on industrial equipment/Boilers/Burners as well as Commercial and Domestic Heating. AXA are OK if you do not do that kind of work and they will cover a certain amount of commercial Heating.
 
Trade direct
 
Status
Not open for further replies.

Reply to Liability insurance - recommendations please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
324
oz-plumber
O
P
  • Question
Could the BAXI commercial boiler parts/flue melt ?
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
2
Views
60
oz-plumber
O
C
Greenstar Boiler Not Working
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days it's increased whilst cold...is this a regular problem.
Replies
1
Views
175
Lou
Lou
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
170
Lou
Lou
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
263
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Forum
Electrical Blog
Tile Blog
Tile Talk
Electricians Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock