Discuss Kane Gas Flue Analyser Issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

EvilDrPorkChop

Esteemed
Plumber
Gas Engineer
Messages
1,271
My Kane 455 has gone a bit barmy and under reading on C02 massively. Had a Vaillant burning at 3% CO2 and thought something wasn't quite right when CO was OK, GR bang on and inlet pressure fine. So checked it with another boiler and was showing same, comparing it against another machine it's showing out.

So sure enough my analyser seems to be off reading when it was working fine yesterday. Water trap clear and new filter in.

Anyone had the same issue?
 
you tried taking the bats out and letting it purge for a while outside
 

Reply to Kane Gas Flue Analyser Issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
360
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
486
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock